Part of Mobile Cell Phones and their Functionality
A mobile cell phone contains all parts and electronic components, which can be divided into Big Parts and Small Parts. Through this article, you're going to learn all about significant parts and IC components in a mobile cell phone/smartphone and their functionality.
IC parts of a mobile
cell phone/smartphone and their functionality
1. Antenna switch
Identification: In the
Network Section of a mobile phone/smartphone, both Android and iPhone, it is
present and made up of metal and non-metal. In GSM sets, it is in white, while
in CDMA sets, it is found in golden metal.
Work / Function: Searches the network
and passes ahead after tuning.
Faults: If the antenna switch
is malfunctioning, there will be no network in the mobile phone, such as iPhone 11 parts suppliers.
2. Power Function
Oscillator (PFO)
Identification: Also known as P. A
(Power Amplifier) and Band Pass Filter are found near the Antenna Switch in the
Network Section on the Motherboard of a Mobile Phone or Smartphone.
Work / Function: Filtering and
amplifying network frequency, it selects the home network.
Faults: If the PFO is not
working, there will be no network in the mobile phone. If it, however, gets
short, then the mobile phone, like Samsung galaxy S7 parts, will get dead.
3. RF IC / Hagar / Network
IC
Identification: Also known as an RF
signal processor, these are found in the Network Section of a Mobile Phone.
Work / Function: According to the
instruction from the CPU, it transmits or receives any audio or radio waves.
Faults: If the RF IC
malfunctions, there will be problems with the network in the mobile phone
resulting in the mobile phone, such as samsung
galaxy tab parts getting dead sometimes.
Comments
Post a Comment